Extracting maximum power from various batteries with various protections
Low quiescent current
Power-saving mode to reduce power consumption:
35W (3s sensing cycle)
25W (30s sensing cycle)
Battery charger:
3 steps intelligent battery charging
8 pre-set battery type selector plus de-sulphation for totally flat batteries
Powerful charge rate: up to 70A, selectable from 20 to 100%
PFC (power factor correction) for charger, less power consumption than conventional units
Transfer:
Output voltage regulation: 230 or 120V ±10% (optional)
With 15 seconds delay before transfer, extra protection for loads when used with generator
Input AC voltage range selectable: 184 to 253V or 154 to 253V for various types of loads
With 8ms typical transfer time, guarantees power continuity
With 30 or 40A through current ability
Allows start up and through power without batteries
On remote control
Ability to switch unit on/off
Ability to select or deselect power saver mode
With 17 alarms or warnings, informative for easier operation and trouble shooting
LCD status display, battery/AC priority and USB communication ports are available
All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.
Note: Not all certifying agents offer online lookup, and some have a lag time for posting new certificates. If you are unable to find a certificate online, contact the certification agency or supplier for further verification.
){kind=link}
){kind=link}